Is It Time For A Blown Double Glazing Repair?
Condensation is a symptom of blown double glazing. This is because the seal between the two panes of glass has cracked, allowing the inert gas to escape.
Repairing your double-glazed windows is an absolute must. It will not only help you save money and decrease the noise outside however, it will also restore the insulation properties of the window.
Seals that are damaged
The window seals of a double-glazed system are responsible for forming an airtight barrier and watertight. This keeps the heat in and the cold out. The seals could be damaged and cause misty windows, drafts, and energy loss. If your windows are starting to appear to be damaged to the seals then it's time for a repair or replacement.
One of the first symptoms you'll notice is the appearance of condensation that forms between the glass panes. This happens because the inert gas within the sealed unit degrades and allows warm air from outside to get into your home. The inert gas cannot be restored once this occurs.
A dark, mouldy look on your windows or frames is another typical indication. This is a sign that the seals are broken and moisture is leaking into the frame. This could cause the wood to soften, warp and peel paint. After the window has been replaced, any moisture within the frame will be eliminated and you will be able to regain the original thermal efficiency.
If you decide to repair your windows or replace them then you must also upgrade the double glazing to an A-rated energy-efficient glass. This will increase your thermal efficiency even further and lower your energy costs. You can check the energy efficiency of the windows you have in place by contacting the manufacturer you purchased them from or by searching online.
A window that is draughty could be a sign that the window seals are damaged or have been blown. If the window continues to keep the cold out, it's worthwhile to replace the seals as soon as you can. This will enhance the performance of your windows.
A simple test that you can use to determine if your window seals are broken is to rub the edges of your window with frozen water for a few seconds. If you're unable to remove the fog from the window and the seals are not able to be repaired, then they are likely to be broken. It is crucial to act quickly on this because it could reduce the insulation of your double glazing, which can result in higher energy bills.
Water Leaks
Double glazing is a worthy investment that will add warmth to your home, reducing noise and improving energy efficiency, which can save you money in the long term. However, it's no surprise that many homeowners face problems with their windows from time time. One of the most common issues that could lead to a double glazing replacement is condensation that forms between the panes. This can lead to a dirty appearance or, even more importantly it can allow water into your property.
Water vapour condenses onto cold glass, creating moisture that cannot be removed. This is a normal process that occurs when the temperature drops in the evening or when the windows are left exposed to rainy weather such as heavy dew. The best method to tackle this issue is to ensure that your home is equipped with adequate ventilation and the use of a dehumidifier in all rooms that are susceptible to moisture accumulation.
If your double glazed window is misting and you are unable to wipe the water off then it's likely your unit has blown as this is the only way that water can get into a sealed double glazed unit after the gas has evaporated. There are companies who claim to be able to repair existing misted double glazed units by drilling holes into the glass and injecting chemical through them which will absorb the moisture from inside the unit. This can help clear the fog and condensation in a short amount of time but it is only temporary and will need repeating.
Once a sealed unit is blown it is irreversible and your double glazing will need replacing as it no longer has the thermally insulating properties that it had when it was new. It is worth checking whether your double glazing is still covered by the company that installed it, in this case, they can reinstate the warranty or offer a discount to replace the unit.
Many online stores offer a simple kit that can be used to fix misted double glazing. This involves drilling small holes in the glass, then spraying a specific resin in the gaps to stop water from entering through. This is a longer-lasting and cost-effective solution, but it must be done by a professional with the necessary experience.
Deterioration
If the seals in your double glazing aren't working as they should, moisture can enter the space between the window panes and this will cause them to mist. This can result in the windows becoming less effective as they are no longer able to keep the cold out and the warm in.
In certain circumstances misting can cause the formation of water inside your double-glazing. This can damage the frame and if not addressed can cause water leaks, or even growth of mould.
Misting may not always be as bad as it sounds, and it's worth contacting your installer in the event that your windows are under warranty to see whether they can assist with repair or replacement costs. If they aren't the case, you'll need to contact a specialist to complete repairs.
A professional can repair your damaged double glazed windows, restoring their thermal efficiency and removing the condensation buildup. It is essential to fix the windows when you notice the misting, as it will reduce your energy bills and prevent water from entering your walls or the plaster that could cause significant damage.
A blown double-glazed window repair will not only restore the performance of the double glazing but also ensure the safety of your family. The windows that are blown usually have huge gaps between the glass, which are not a good idea for animals or children to play with. A professional can even out pressure by drilling a small hole and then use silicone sealant to reseal your windows.
You should check whether your double-glazed windows are covered by a guarantee. If double glazing window repairs can't find contact details, you might be able to claim a portion of your installation costs back. Certain companies offer a lifetime guarantee on their products, so it's worth checking to determine if your windows are covered by this. Contact your provider immediately if there are any issues with your double-glazed windows. You can do this via phone or in person. If you can, follow up your phone call in writing.
Poor Insulation
Double glazing is a worthy investment in any home, adding warmth to your home and blocking out outdoor noise. They are also a great insulation and energy efficiency upgrade for any home. As with any home improvement there are always potential issues. One of these is when double glazed windows start to mist. Misted windows are unsightly and can smudge your clean aesthetics. A build-up of moisture is an ill-health risk. Fortunately, this issue is easily fixed by a professional double glazing repair using blown.
If you notice a buildup of condensation on your double-glazed windows, it's likely that there's an issue with the gas cavity between the glass panes. This signifies that the inert gases have evaporated, allowing warm air to get into your home. This is a major issue that requires fixing, since the double glazing can not be able to perform its function, and your home will become colder as a consequence.
Misting on the outside of your window is an natural phenomenon that occurs mostly at night and during the early hours of the morning when the temperature falls and dew forms. This isn't a reason to be concerned about and is simply the result of the windows functioning just as they should.
The inside of your double glazed windows is a different matter. It is usually caused by inadequate ventilation and the humidity levels within your home. Utilize extractor fans to decrease humidity in the kitchen and bathroom. Also open your windows frequently to allow fresh air circulation.
Fortunately, the majority of the time your blown double glazing repair will involve replacing the damaged window pane. A qualified tradesman will first assess the condition of your frame and ensure that the proper measurements are taken to ensure that when a new window is delivered it will be cut to fit properly. They will then take out the old window and replace it with a new one, making sure that all seals are installed to prevent moisture from entering your home.